STAR TOP

About STAR TOP

Chemical Composition: Azoxystrobin a.i. 18.20% w/w, Difenoconazole al. 11.40% w/w, (Dispersant)%, Napthalenesulfonic acid, sodium salt condensated with formaldehyde 1.22% w/w, Blockcopolymer PO/EO 1.13% w/w. (Antifoaming Agent) %, Polydimethyl siloxane) 0.79% w/w, (Thickner) %, Linear polysaccharide 0.25% w/w, (Preservative) %, 1,2,-benzisothiazole-3 (2H)-one 0.03% w/w, (Wetter)%, Cetyl/stearyl-alcohol ethoxlated 20.70% w/w, Water Q.S. % Total 100.000% w/w Weather condition- dont spray during windy and ralny weather, soil-spray when where is sufficient moisture in soil; crops stage, application technique & timing, equipment, nozzle type, Instruction for mixing & frequency including number of sprays-measure out required quantity of the product and mix it well with a small quantity of water. Add the remaining quantity of water as specified with through agitation for total coverage of crop. Give 1-2 sprays (depending on disease pressure, repeat the spray) with knapsack or any other suitable sprayer having hollow cone or any other suitable nozzle at the time when crops are infested with above mentioned diseases; re-entry period - do not enter the field until spray droplets are dried. Dangerous to re-use empty containers. The used packages shall not be left outside to prevent their re-use and shall be broken and buried away from habitation. Precaution: Wash contaminated clothes and parts of the body after application. Wear full protective clothing (hand gloves, mask, goggles, boots) During application, avoid inhalation, do not smoke, drink, eat and chew anything during application. Do not use cooking utensils for preparing the spray solution. Use sticks for stirring the spray solution. Wash hands with soap and plenty of water and change clothes after the work is over. If contamination occurs with concentration or spray mixture, immediately wqash skin thoroughly, flush eyes for atleast 15 minutes with abundant fresh water, remove contaminated clothing. After use, thoroughly clean protective equipment and wash entire body and change clothing. The product shall not be used in area where pisciculture/intercropping pisciculture is practiced along with rice cultivation. Product is toxic to fish. Antidote: No specific antidote is known. Treat symptomatically and give supportively therapy. First Ald: Skin contact: Remove contaminated clothing and thoroughly wash the affected parts of body with water by soap and water. Inhalation: Remove the affected person from the danger zone to well-ventilated room or to fresh air and protect from undercooling. In case of suspected poisoning: Seek medical advice immediately. Eye contact: Immediately irrigate with eye wash solution or clean water, holding the eyelids apart, for atleast 15 minutes. Obtain immediate medical attention. If swallowed: Repeatedly administer medical charcoal in plenty of water. Seek medical advice if a large volume of concentrate was ingested. Note: Never give anything by mouth to an unconscious patient and do not induce vomiting. Symptoms: Poisoning may cause symptoms of activity decrease, pupil dilation, moderate foot withdrawal, reduce splay reflex, Increased breathing depth and reduced breath rate etc. KEEP IN A COOL, DRY PLACE AWAY FROM HEAT OR OPEN FLAME. CAUTION: NOT TO BE USED ON CROPS OTHER THAN SPECIFIED ON THIS LABEL/LEAFLET

Exceptional Purity for Optimal Performance

With a purity level of 99%, STAR TOP provides outstanding reliability and efficiency in its applications. The high level of refinement ensures the absence of unwanted contaminants, making it suitable for sensitive processes where quality is critical.


Quick-Release Liquid Formulation

STAR TOPs quick-release, liquid state allows it to act rapidly upon application, ensuring prompt results in processes that require immediate effectiveness. This characteristic makes it particularly valuable in time-sensitive industrial environments.


Dependable Supply and Service in India

As a leading manufacturer and supplier, we make STAR TOP readily available throughout India, offering consistent product quality and responsive customer support to meet diverse industrial requirements.